How to use an iLOQ key fob with iLOQ readers
Charge the iLOQ K55S.2 Key Fob before the first use to make sure that it operates correctly.
Press and release the button on the iLOQ K55S.2 Key Fob to activate it. The LED will blink amber. (Note! there is no button in the older key fob models).
Within 5 seconds of pressing the button, touch the iLOQ lock or iLOQ NFC Reader with the bottom of the K55S.2 to activate the lock. Wait until the K55S.2 shows a green light to indicate that access is granted.
When the light turns green and you hear a beep, the door is open. If the light turns red, it means your key does not have access rights to that door. If you believe the access rights should be in order, try again.