Open navigation

Programming Locks on iLOQ Manager

This section describes how to program locks on iLOQ Manager.

Proceed as follows.

  1. Select Basic data > Browse locks.

  2. Select the locks to be programmed.

    The selected lock must be in the Ordered or Transferred to programming state. If the lock is in the In planning state, order the lock first. See Ordering Locks.

  3. Right-click to select Program lock.

    The Programming of locks wizard is opened.

  4. Select Program locks.
  5. A list of locks to be programmed is shown.
  6. Select Next.
  7. Select Program locks.
  8. Select Next.
  9. A summary screen is shown.
  10. Select Ready.
  11. A status screen is shown, displaying the lock that is next in the programming queue.
    Figure: Programming Status Screen
    Programming Status Screen
  12. Insert the programming cable to the requested lock.
  13. Follow the instructions on the programming status screen.
  14. A summary screen is shown.
  15. Select Close.
  16. The programmed locks appear in the lock grid view in the Programmed state.
R
Rosalind is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.