Open navigation

Connecting Monitored Doors

This section describes how to connect monitored doors.

Operating modes 2—9 support indicating door status on S10 Manager.

Proceed as follows.

  1. When deploying the installation, for example by applying a quick guide above that uses one of the operating modes 2—9, connect the door monitoring contact to the Door Module.
  2. Connect the door contact, or any other potential-free sensor information, to IN2 and COM.
  3. Add the monitored door to S10 Manager. See Adding Monitored Doors.
Rosalind is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.