Open navigation

Adding Locking System Service Addresses

This section describes how to add new locking system service addresses to iLOQ Manager.

Proceed as follows.

  1. Open iLOQ Manager.

    The login screen is opened.

    Figure: Login Screen
    Login Screen
  2. Click the settings wheel button.

    The login data screen is opened.

    Figure: Login Data Screen
    Login Data Screen
  3. Enter locking system information as follows:
    • Service address — Enter the locking system database server address, in this field. Ensure that the service address is the same as in the Login data document provided with the locking system.
    • Service code — Enter the locking system-specific service code, in this field. Ensure that the service code is the same as in the Login data document provided with the locking system.
    • Customer name — Enter the name of the locking system, in this field.
  4. Test the connection by clicking the Test server connection button.
  5. If the server connection succeeds, select OK.
  6. If the server connection fails, you can attempt to establish the connection by other means:
    1. Select the alternative method from the drop down menu, and fill in the requested information.
      Figure: Advanced Connection Settings
      Proxy Settings
    2. Test the connection by clicking the Test server connection button.
  7. If the server connection succeeds, save the selected settings when exiting from the dialog.
R
Rosalind is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.