This section describes how to view the properties of a calendar controlled door on iLOQ Manager.

1. Select Additional data > Calendar controlled doors.
2. Double-click the selected door.

   The tabs are:

   • Basic information — The fields are:

     • Network module name — This field indicates the network module name to which the Door Module is connected.

     • Door name — The name of the calendar controlled door.

     • Relay number — The number of the output relay, which this calendar controlled door controls.

     • Door module serial number — The serial number of the Door Module.

     • The following information refers to lock information, if the door module is programmed as a lock, and it controls the same relay as the calendar.

       • Placement — This column contains the placement information of the lock.

       • Locking target — This column contains the locking target information of the lock.

       • Door module serial number — The serial number of the lock, that is, the Door Module.

     • Relay type — This value is always Relay.

   • Calendars — This tab contains the calendars attached to control the door. The columns are:

     • Calendar name — The names of the calendars attached to control the door.

   • Type — This tab contains the calendar type. See Calendar Controlled Doors.

   • Lock — This tab contains lock information, if the door module is programmed as a lock.

   • Door audit trail — This tab contains the event log on the calendar controlled door relay. The columns are:

     • Index — The consecutive event number. The possible lock event index numbers refer to the lock audit trail event numbers.

     • Point of time — The time when the event took place.

     • Event type — The type of event.

     • Duration — Duration of the calendar control.

     • Source — The controlling source, such as a calendar name or lock placement.