Select your region or visit global site

Support
Open navigation

Adding a Direct Control to a Calendar

This section describes how to add a direct control to a calendar on iLOQ Manager.

Tip:

You can also manage door control calendars, attached to a door, directly by double-clicking the calendar controlled door in the calendar controlled doors view.

Proceed as follows.

  1. Select Additional data > Calendars.
  2. Double-click the door control calendar where you want to add the control.
  3. Select the time for the control by painting it with your mouse.
  4. Right-click the painted area and select Add control.

    Add control information as follows:

    • Target — The name of the calendar that you are editing.

    • Description — Enter an optional description for the control, in this field.

    • Control begins — Enter a start time for the control, in this field.

    • Control ends — Enter an end time for the control, in this field.

    • Create control sequence — If you select this check box, you can create a repeated control sequence. Add control sequence information as follows:

      • Repeat control — Select how often the relay sequence will be repeated, in this drop-down menu. The options are:
        • Every week — If you select Every week, the control will be repeated every week on the defined time. Use the weekday check boxes to select the weekdays on which the control will be repeated. Define also the control sequence ending criteria.
        • Every month — If you select Every month, the control will be repeated once every month on the defined date and time. For example, if you have selected 10 May 06:00 as the First control starts value and 10 May 22:00 as the First control ends value, the control will be applied on every tenth day of the month, between 06:00 and 22:00.
        • Every year — If you select Every year, the control will be repeated once every year on the defined date and time. For example, if you have selected 10 May 06:00 as the First control starts value and 10 May 22:00 as the First control ends value, the control will be applied on every 10 May every year, between 06:00 and 22:00.
    • By default, the control sequence will run indefinitely. If you want to define an end date for the sequence, select the End date in the Control sequence ends drop-down list, and define the end date in the date field.

  5. Select OK.
  6. Select Save.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article

Didn't find what you were looking for?

Submit a ticket