Placing Locks onto a Floor Plan
This section describes how to place locks onto a floor plan on iLOQ 5 Series Manager.
- Select .
- Select the floor plan where you want to add the lock, by clicking the floor plan name in the floor plan list at the bottom right-hand corner of the grid view.
The selected floor plan is shown on white background color in the list. The other floor plans are shown on blue background color in the list.
- Select .
- Split the grid view in a way that the locks are displayed on one page and the floor plans on the other.
- Right-click a tab.
- Select either:
- New Horizontal Tab Group — Split the grid view horizontally in two parts.
- New Vertical Tab Group — Split the grid view vertically in two parts.
- Select the desired lock on the Locks page, and drag it to the desired place on the floor plan.
The items on the floor plan are color coded as follows:
-
Green lock icon — The selected access rights and/or keys have access to this lock.
Note:
If you have both a tab for keys and a tab for access rights open, and you have selected keys and access rights, the combination of the selected key access rights and access rights is reflected on the floor plan.
-
Red lock icon — The selected access rights and/or keys have no access to this lock.
Note:
If you have both a tab for keys and a tab for access rights open, and you have selected keys and access rights, the combination of the selected key access rights and access rights is reflected on the floor plan.
-
Purple lock icon — The lock is a networked lock.
-
Orange lock icon — The lock is defined as an SKG*** lock and according to the access rights of the programmed key, the key would have access to the lock, but the K5 key version is lower than FW258. The key cannot access these locks. See SKG Compliant Keys.
-
Network icon — The item is a network module.
