The Programmer can store max. 386 tasks. Go to iLOQ S10 Manager programmer content, transfer tasks from the programming device (from right to left) / move some of the packages to another programming device.
Failures during the S10 key programming can be caused by multiple reasons. Corrective actions:
Make sure that the key-shaped programming cable is not in the key programming opening of the programming device. This will cause a short circuit in the device.
The iLOQ S10 programming device can retrieve at least 25 lock events, depending on the number of log events in each lock.
If you have followed the instructions in iLOQ S10 Manager User Guide, and still cannot find the log events in iLOQ Manager, ensure that you are logged in with the programming device and that the retrieved events have been transferred to the server.
Cylinders delivered from May 2013 onwards have a connector. Product version C10S.x.22 and in iLOQ Manager HW version 9 or higher.
First, log in to iLOQ S10 Manager. Then insert the programming token to be checked into the programming device. The light indicator at the bottom right of the screen shows the situation: BLUE = Not programmed GREEN = Programmed for that locking system RED = Programmed for another locking system
The error is caused by a wrong programming task for the lock, the user is trying to:
If Windows does not automatically install the driver, it can be installed manually through the device manager. You can download the driver here: https://ftdichip.com/wp-content/uploads/2021/08/CDM212364_Setup.zip
Please note that iLOQ does not manage its customers' iLOQ locking systems.
If you need a new key (digital or phone key), have lost your key, or want to check the access rights of your key, please contact the administrator of the locking system (Property manager / Maintenance company / iLOQ Retailer).
