Editing the Lock Settings – No Programming Needed
This section describes how to edit lock settings without programming the lock, on iLOQ 5 Series Manager.
The settings that you can edit are:
Note:
Required fields are marked with an asterisk (*).
Proceed as follows.
- Select .
- Select the desired lock or locks.
- Right-click to select Edit lock.
The Basic information for the lock(s) is opened.
- Edit the lock information, as necessary.
The fields you can edit are:
-
Placement — Placement refers to the location of the lock on the floor plan. If you are adding several locks at a time, set the first placement in a way that it ends with a number, such as A1. In this way, the system adds consecutive placement numbers as follows:
-
Approach direction — Approach direction refers to the direction where the lock will be opened from, if the door is equipped with double side lock.
-
Locking target — Locking target provides a more detailed description or name of the room or premises, where the lock will lead to.
If you are adding several locks at a time, set the first locking target in a way that it ends with a number, such as Door 1. In this way, the system adds consecutive locking targets as follows:
-
Lock cylinder — Lock cylinder refers to the lock cylinder type. Select the type from the drop-down list, or enter the type manually.
-
Lock state confirmation — For H50S locks, you can choose if lock status confirmation is used.
This setting is visible, if:
-
The Lock collects audit trail lock setting is in use.
-
The Lock status confirmation locking system setting is in use. See Editing Phone Key Settings.
-
The lock cylinder supports this feature.
The options are:
-
Not in use — Lock status is not confirmed after events.
-
User confirmation — Ask the key holder if the lock was opened or closed after each event.
-
Lock confirmation — Ask the key holder to read the status from the lock after closing events.
This option is only visible, if the lock has shackle detection.
- Door type — Door type refers to the type of door where the lock will be mounted on.
- Escutcheon — Escutcheon refers to the shield plate that surrounds the keyhole on the door.
- Lock model — Lock model refers to the model of the lock case.
- Cylinder extension — Cylinder extension refers to the extension that will be added to the new lock.
- Door thickness (mm) — Door thickness indicates the thickness of the door where the lock will be mounted on.
- Lock frame depth (mm) — Depth of lock body (mm) indicates the depth of the lock case.
- Opening direction — Opening direction indicates the door opening direction.
- Label — Label refers to the label on the lock.
- Note — Note refers to additional information on the lock or the door.
- Other equipment — Other equipment refers to other equipment related to the lock or the door.
- Zone — Zone refers to the zone of the lock.
- When done, select Save and close.
