This section describes how to edit the locking system logging settings on iLOQ Manager.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to edit the locking system logging settings on iLOQ Manager.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to import lock data from Excel to iLOQ Locking System.
You can import the same data as you would enter through the Add lock wizard. You cannot import any data related to the lock state.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to import persons from Excel to iLOQ Locking System.
You can import the same data as you would enter through the Add person wizard.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to add keys to the selected locks on iLOQ Manager.
When you add keys to locks, you typically add, for example, several apartment-specific or office-specific keys for a large number of locks at the deployment phase. Do not use this feature for adding single keys.
Mandatory fields are marked with an asterisk (*).
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to open the user manual on iLOQ Manager.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to view information about the manufacturer on iLOQ Manager.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to check the iLOQ Manager software version.
After the iLOQ Manager software has been updated, the program automatically opens the release note on the Program version info tab, after you have logged in to the system. Once you have closed the release note, you can re-open it.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articlesCalendar controls are used to control electric locks on doors. If all the door locks must be open at the same times, you can control them by using one calendar only. In other words, you do not have to create a separate calendar for each door.
If a door needs to have different open times, you can create a separate calendar for this door. A door can also be controlled by several calendars.
The calendar types are:
Door control calendar — A door control calendar can only be attached to a calendar controlled door. A door control calendar can contain two types of control types:
Direct control — The door is controlled to be open or closed at different times.
Code access group control — You can define the times in the calendar, when the door can be opened by using a code. At the defined times, the door can be opened by entering an access code on the keypad. This code is only valid on the times defined in the calendar.
Code access groups are meant to allow door access to people, such as visitors, who do not and will not have a key.
One calendar can have several controls of both control types.
Key PIN-code time calendar — A key PIN-code time calendar can only be attached to locks. In the key PIN-code time calendar, you define the times when the lock requires key holders to enter a PIN-code on the keypad, in addition to using a key.
This calendar feature must be separately activated, before it can be used.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to browse calendar controlled doors on iLOQ Manager.
You can monitor the physical status of a monitored door.
Proceed as follows.
The columns are:
Door name — The calendar controlled door name.
Latest state — The latest state of the calendar controlled.
State updated — The time when the calendar controlled door state was last changed.
Did this article solve your problem?
Give feedback & see related articlesThis section describes how to view the properties of a calendar controlled door on iLOQ Manager.
Proceed as follows.
Did this article solve your problem?
Give feedback & see related articles