Key Reader A10.42 Interfaces

The Key reader is connected to the Relay card KEY READER connectors 1WIRE and GND, in such a way that the Key reader red wire is connected to 1WIRE, and the black wire to GND. The Relay card also has a mating connector for the Key reader wire connector, which can be used, for example, in the programming stage.

In cabling, use a data transfer cable, such as MHS 5x2x0.5, should be used. The maximum distance between the Relay card and the Key reader is 100 metres.

Can’t find what you are looking for?

Send a support request, and you will be connected to our expert