Basic

With the Relay card, you can control one or two devices through the relay outputs K1 and K2.

The available relay modes are:

  • Toggle
  • Impulse
  • Key hold
  • Roller door

In this configuration, a valid key always activates both relay outputs K1 and K2, except in the roller door mode, which is a special connection (see Roller Door). Relay outputs can also be activated with a potential-free contact signal (for example, a push button) to input Button1. In this case, relays K1 and K2 will behave according to the selected relay mode in the same way as with a key.

A practical example for the impulse mode with default delay times: a motorised lock is controlled with an 8 second impulse of the K1 relay, and the K2 relay is used to bypass the magnetic switch of the door, for 30 seconds. When exiting the premises, the user presses a push button, whereupon the motorised lock is opened and the door’s magnetic switch is bypassed for 30 seconds.

See also Appendix 1 – Wiring Diagram for R10S.3 Basic.

Can't find what you're looking for?

If you've lost your key or need a new key, please contact your property manager, maintenance company, or local iLOQ retailer. iLOQ does not manage its customers' locking systems, so we cannot provide assistance with them through the support request form below.

Send request