Connecting Monitored Doors

This section describes how to connect monitored doors.

Operating modes 2—9 support indicating door status on S10 Manager.

Proceed as follows.

  1. When deploying the installation, for example by applying a quick guide above that uses one of the operating modes 2—9, connect the door monitoring contact to the Door Module.
  2. Connect the door contact, or any other potential-free sensor information, to IN2 and COM.
  3. Add the monitored door to S10 Manager. See Adding Monitored Doors.

Can’t find what you are looking for?

Please note that iLOQ does not manage its customers' iLOQ locking systems.

If you need a new key (digital or phone key), have lost your key, or want to check the access rights of your key, please contact the administrator of the locking system (Property manager / Maintenance company / iLOQ Retailer).

Send request