Netwerkmodule toevoegen (N500)

Voeg een N500 Net Bridge toe aan uw klantsysteem. Tijdens deze stap worden de instellingen van de netwerkmodule gedefinieerd en worden de netwerkmodules opgeslagen als concepten. Na het aanmaken van de concepten wordt de daadwerkelijke programmering uitgevoerd in een apart proces.

Opmerking: N500-netwerkmodules worden geprogrammeerd via een lezer die via een N502 online module met de netwerkmodule is verbonden.

Selecteer Vergrendelingsapparaten > Toestellen beheren.

Stap 1/3: Toestellen

1. Selecteer de percelen waaraan u een netwerkmodule wilt toevoegen.
2. Select  and enter the required information:
   • Type: Select Network module.
   • Product code: Select N500.
   • Name: Give the network module a descriptive and unique name.
   • Premises: The premises where the network module is located.
   • Time zone: Select the time zone for the network module. Time zone information comes from the premises the network module is located in. Note: If the time zone of the network module is changed, the time zone of the premises will also be changed automatically.
   • Serial number: Enter the serial number of the network module. Make sure the serial number is correct.
   • Software update time: The specific time when software updates are scheduled to occur.
3. Select Show additional fields to view more settings. We recommend using the default network and server certification settings. The following settings are available:
   • Network settings
     • Do not use DCHP
     • Do not obtain DNS server address automatically
   • Server certification settings
     • Public key pinning and domain name verification (recommended). Note: Enter the public key only if necessary, for example due to custom proxy settings.
     • Public key pinning
     • Domain name verification
     • No server verification (not recommended)
4. Select  to go back to the premises structure view.
5. Select Next.

Step 2/3: Summary

6. The summary shows the actions that you decided to perform in the previous steps. Review the summary and select Confirm.

Step 3/3: Feedback

7. In this final step, the actions you confirmed in the previous step will be performed. You can follow the actions and their progress on the screen.
8. Select Show summary to view an overview of the performed actions.
9. When you’re done select Close.

• VorigeInleiding
• VolgendeAdd online module (N501/N501.1/N502)