Welcome to iLOQ Support

This section describes how to place locks onto a floor plan on iLOQ Manager.

1. • Select Basic data > Browse floor plans.

     

   • Select the floor plan where you want to add the lock, by clicking the floor plan name in the floor plan list at the bottom right-hand corner of the grid view.
     The selected floor plan is shown on white background color in the list. The other floor plans are shown on blue background color in the list.
   • Select Basic data > Browse locks.

     

2. Split the grid view in a way that the locks are displayed on one page and the floor plans on the other.
   1. Right-click a tab.
   2. Select either:
      • New Horizontal Tab Group — Split the grid view horizontally in two parts.
      • New Vertical Tab Group — Split the grid view vertically in two parts.
3. Select the desired lock on the Locks page, and drag it to the desired place on the floor plan.

   The items on the floor plan are color coded as follows:

   • Red star — The lock is an offline lock.

   • Purple star — The lock is a networked lock.

   • Orange star — The lock requires online opening authentication.

   • Green star — The selected access rights and/or keys have access to these locks.

   • Blue diamond — The item is a network module.

This section describes how to replace imported floor plans to iLOQ Manager.

1. Select Basic data > Floor plans.
   
    
2. Select Add floor plan.
   The Importing of Floorplan wizard is opened.
3. Select Replace existing floor plan.
4. Click the ... button and select the file that contains the new floor plan.
5. Select Next.
6. The next options depend on the image file type.

   If your floor plan is a PDF file:

   • Select the Page number where the desired floor plan is on.
   • Select the desired Resolution for the imported figure.

   If your floor plan is an image file in, for example, the PNG format:

   • Check that the figure looks as planned in the preview.
7. Select Next.
8. Check the image file size in the Size field.
   If the file size exceeds 1 MB:
   1. Select Back.
   2. Select a figure with a smaller file size or, in the case of a PDF file, reduce the Resolution for the imported figure.
   3. Select Next.
9. Select the floor plan that will be replaced.
10. Do not rename the floor plan.
11. Select Next.
12. A summary screen is shown.
13. Select Ready.
14. Select Close.
15. The figure is uploaded on the server.
16. Check that the figure is sharp enough.
    If the figure is not sharp enough, replace the figure again.
17. If the replacing floor plan is of a different size than the original, and the locks are on incorrect locations, you can move the lock in their correct positions all at once. See Dealing with Re-scaled Floor Plans.

This section describes how to re-scale the lock topology, to match with a replaced floor plan that is of a different size than the original floor plan.

1. Select Basic data > Floor plans.
   
    
2. Select the new floor plan.
3. Click the Move all locks according to reference moves button.
   
    
4. Select a lock close to the top right-hand corner of the floor plan and drag it to its correct position on the floor plan.
5. Select a lock close to the bottom left-hand corner of the floor plan and drag it to its correct position on the floor plan.
6. The other locks are automatically re-positioned to their correct positions.

This section describes how to delete floor plans from iLOQ Locking System.

1. Select Basic data > Browse floor plans.

   

    
2. Open the floor plan to be deleted.
3. Right-click the selected floor plan name in the floor plan list at the bottom right-hand corner of the grid view and select Delete floorplan.
4. A confirmation screen is shown.
5. Select OK.

You can transfer multiple key or lock programming tasks to Programming Token. There are 210 free memory locations in Programming Token memory. One task consumes one memory location.

This section describes how to manage Programming Token content on iLOQ Manager.

1. Select Basic data > Manage programmer content.

   

2. The Manage programmer content wizard is opened.
3. Select Manage programmer content.
4. Select the tasks to be added to or removed from the Programming Token.
   • — Click the Arrows right button to move all items to the selection list.
   • — Click the Arrow right button to move the selected item(s) to the selection list.
   • — Click the Arrow left button to remove the selected item(s) from the selection list.
   • — Click the Arrows left button to remove all items from the selection list.
5. Select Next.
6. A summary screen is shown.
7. Select Print worklist of programmer, if you want a printout of the work list.
8. Select Ready.
9. Select Close.

This section describes how to print out Programming Token content on iLOQ Manager.

1. Select Basic data > Print content.

   A preview of Programming Token worklist printout is opened.

2. Print out the list by clicking the Print button.
3. When done, close the tab.

Access rights are used to define the relationships between the keys and the locks. As a rule, if a key shares one or more access rights with a lock, the key can open the lock.

For your own convenience, divide the access rights into two categories:

• Access rights according to person groups. You can consider these as access right groups.
• Lock-specific, individual access rights.

The access rights of an individual person are mainly managed through access right groups. Lock-specific, individual access rights complement the access right groups, and provide flexibility to access right management.

The list below provides a planning guide for access rights:

• Create access rights according to person groups, such as "Maintenance", "Sub-contractor", "Cleaner", "Guard" or "Employee". Usually, these access rights are used on keys that will be created to these person groups, respectively. A usual exception to this recommendation is the "Master access" access right, which covers all locks.
• An access right can contain one or several locks. For example, the "Maintenance" access rights can cover the main entrance lock and the technical facilities locks.
• A lock can contain one or several access rights. For example, the technical facilities locks can contain the "Master access" and "Maintenance" access rights.
• A key can contain one or several access rights. For example, the maintenance key can contain maintenance and employee access rights.

An access right can be, by default, shown or not shown in iLOQ Manager. You can use the access right visibility setting to hide access rights that are rarely used, if your system contains hundreds of them. These can be, for example, lock-specific access rights created in addition to access rights based on person groups. If there were hundreds of rarely used, lock-specific access rights listed in the same view, it would be inconvenient to browse and find commonly used access rights in iLOQ Manager. In a case like this, it is a good idea to not show the lock-specific access rights, by default. This makes the system more usable.

There are two access right types:

• Standard access rights.

  The encryption of standard access rights is done in the Programming Token. Thus, editing standard access rights on the lock or key always requires presence of the Programming Token.

• API access rights.

  The encryption of API access rights is done in the database, enabling access right editing through an Application Programming Interface (API), without presence of the Programming Token.

This section describes how to browse access rights on iLOQ Manager.

1. Select Additional data > Browse access rights.

   

    
2. The access rights with the Is displayed by default visibility setting are shown in the grid view.
   Tip:

   If you also want to see the access rights with the Don't show as default visibility setting, click the filter icon.

   

    

   The columns are:

   • Name — This column contains the name of the access right.

   • Description — This column contains the description of the access right.

   • Conditional access — The check box indicates whether the access right is conditional or not.

   • Default access right — The check box indicates the default access right.

   • Estate — This column indicates the estate where the access right belongs to.

   • Zone — This column indicates the zone where the access right belongs to.

   • Type — The access right type. The options are:

     • Standard
     • API

   • See Access Rights.

   • Visibility — This column contains the access right visibility. The options are:

     • Is displayed by default — The access right is displayed by default.
     • Don't show as default — The access right is not displayed by default.