iLOQ 5 Series Manager quick guide
9 Managing persons and person roles>>
By default, locks are only logical locks, that is, they are just zeroes and ones in Manager. Logical locks are then programmed into the physical locks and installed at their intended locations.
A logical lock is created in manager by selecting "Basic data" > "Browse locks" > "Add lock."
The prompts will guide you to fill in the lock’s placement, approach direction, locking target, lock cylinder model, zone (if enabled), lock type and whether the lock has a clock (RTC) installed, if it collects a trail of all the times it is used and, if it is a phone key, whether it needs to be verified over the Internet.
- If you are unsure about what to put in here, check the explanations from the full manual
S50 keys still need additional information after creation. They are important regarding the installation of the lock.
After creation, the lock’s estates, access rights and time profiles are to be defined. After the logical lock is complete, it can be left in the planning state or either ordered or ordered and programmed.
The locks are programmed for the first time using both the programming key and Manager together. Subsequent programming can be done with just the programming key or if it is an Online lock, it can be programmed over the air through Manager.