Setting up a Code-access Group
This section describes how to set up a code-access group on iLOQ 5 Series Manager.
- Select .
- Enable settings:
- Key PIN Codes in Use
- Code Access Groups in use
- Select Save and Close.
- Select .
- Right-click the desired user to select Edit Usage Rights.
- When you edit the user’s usage rights in the wizard, assign them the Right to manage code-access groups.
- Select and ensure that the rights have been assigned for the user, under the programming key as well.
- Log out and login to refresh user interface controls.
- Select .
- Right-click the desired network module to select Edit relay settings.
- Select Calendar Controllable for the doors, which you want to control through codes.
- Select Save and Close.
- Select .
- Right-click to select .
- Name the calendar in the Calendar name field, for example Entrance Door – Code Access 24H.
- Select .
- Right click to select Add.
The Adding of code-access group wizard is opened.
- Select Add code-access group.
- Name the group.
- Enter a description for the group.
- Enter an access code.
- Select .
- Right-click the desired calendar to select Edit calendar controls.
- Right-click the schedule to select Add control.
- Select the Control begins and Control ends times, and select Create control sequence and Control only by selected code-Access Groups check boxes.
- Press the Select button next to the Selected code-access groups area to select the desired groups.
- Select .
- Right-click the desired door to select Edit calendar attachments.
- Select Attach calendars to door.
- Select a calendar.
- Wait for one to five minutes for the synchronization to complete, and test the functionality.
