Installing Drivers Manually

This section describes how to install drivers manually if they are not installed automatically by Windows Update.

Proceed as follows.

  1. Insert the Programming key into a USB port on your computer.
  2. Open a browser window and go to https://www.support.iloq.com and type P55 driver to search field.
  3. Save the .zip file to your computer.
  4. Extract the .zip file onto your computer.
  5. Open Windows Device Manager.
  6. Go to Other devices > Silicon Labs CP210x USB to UART Bridge.
  7. Right-click Update driver software.
  8. Choose Find the driver software on your computer.
  9. Click Browse and select the driver you just downloaded and extracted.
  10. Click OK.
  11. You can now delete the downloaded .zip file and the folder where you extracted the drivers.

Can’t find what you are looking for?

Please note that iLOQ does not manage its customers' iLOQ locking systems.

If you need a new key (digital or phone key), have lost your key, or want to check the access rights of your key, please contact the administrator of the locking system (Property manager / Maintenance company / iLOQ Retailer).

Send request