Add access points

During this step, access point settings are defined, and the access points are saved as drafts. A draft is a plan of an access point that will be taken into use. The actual programming is performed later in a separate process.

Select Access points > Manage access points

Step 1/4: Access points

  1. Select the premises to which you want to add access points.
  2. Select  and enter the required information:
    • Placement code: Refers to the location of the access point. Use descriptive and unique names. For example, codes marked on floorplans can be used here.
    • Name: Give the access point a descriptive name.
    • Premises: The premises where the access point is located.
    • Blocklist group (Not visible if blocklist groups have not been defined): Select a blocklist group for the access point. For more information about blocklist groups, see Link to blocklist group chapter.
    • Time zone: Select the time zone for the access point. Time zone information comes from the premises the access point is located in. Note: If the time zone of the access point is changed, the time zone of the premises will also be changed automatically.
    • Type: Select the access point type.
    • Product code: Select the product code for the access point. Make sure to select the correct code.
    • Features: After selecting the access point type, the features available for that access point type are displayed. Check the box to enable the feature.
      • S50 lock features
        • Collects audit trails: A chronological list of events for each access point, including date and time stamps for each event.
  3. Repeat the above actions to all the access points you want to add to the premises.
  4. Select to go back to premises structure view.
  5. Select Next.

Step 2/3: Summary

  1. The summary shows the actions that you decided to perform in the previous steps. Review the summary and select Confirm.

Step 3/3: Feedback

  1. In this final step, the actions you confirmed in the previous step will be performed. You can follow the actions and their progress on the screen.
  2. Select Show summary to view an overview of the performed actions.
  3. When you’re done select Close.

Can’t find what you are looking for?

Please note that iLOQ does not manage its customers' iLOQ locking systems.

If you need a new key (digital or phone key), have lost your key, or want to check the access rights of your key, please contact the administrator of the locking system (Property manager / Maintenance company / iLOQ Retailer).

Send request