Program access points

Program access points with a programming key. In this step, the access points added and saved as drafts earlier are programmed.

Note: Access points must be programmed before they can be taken into use.

Select Access points > Program access points

Step 1/4: Access points

1. Select the access points you want to program.
2. Select Next.

Step 2/4: Action

3. Select Program access points.
4. Select Next.

Step 3/4: Summary

5. The summary shows the actions that you decided to perform in the previous steps. Review the summary and select Confirm.

Step 4/4: Feedback

6. In this final step, the actions you confirmed in the previous step will be performed. You can follow the actions and their progress on the screen.
7. Connect your programming key to the USB port of your PC.
8. Follow the on-screen instructions until all the access points are programmed.
9. Select Show summary to view an overview of the performed actions.
10. When you’re done select Close.

• PreviousCreate key blocking groups and assign access points to them
• NextAdd user roles