Download and install programming key driver

Typically, the programming key driver is automatically installed when the programming key is connected to the PC. If this is not the case, follow the instructions below:

  1. Connect the programming key to the computer USB port.
  2. Download the driver for your operating system from https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads
  3. Install the driver on your computer.

Can’t find what you are looking for?

Please note that iLOQ does not manage its customers' iLOQ locking systems.

If you need a new key (digital or phone key), have lost your key, or want to check the access rights of your key, please contact the administrator of the locking system (Property manager / Maintenance company / iLOQ Retailer).

Send request