Introduction
The iLOQ Online system enables the remote management of electrical door environments, such as electric locks, alarm systems, etc., by connecting them to a cloud service via an RS485-connected Net Bridge – N502 online module combination or via an N501/N501.1 online module with 4G connection.
Currently, the iLOQ 5 Series+ system is compatible with the following iLOQ Online system devices:
- N500 Net Bridge
- N501/N501.1 Stand-alone Door module with 4G connection
- N502 Online Door module
- N504i NFC/PIN Door Reader
- N505i NFC/PIN Wall Reader
For general instructions for the iLOQ Online system, see the Online planning guide. For installation instructions and information on the devices see the installation instructions of the product in question.
Network modules (N500)
The iLOQ N500 Net Bridge acts as the central unit of an iLOQ Online system, and as a link between the iLOQ Cloud and the online modules and other bus devices allowing the administrator to remotely control locks and keys with iLOQ Manager+ without the need to visit the installation site.
For installation instructions and information, see https://www.iloq.com/en/catalogue/n500/
Online modules (N501, N501.1 and N502)
The iLOQ N501/N501.1 Standalone Door Module is a standalone device, and it is connected to the server via an LTE connection. The iLOQ N502 Online Door Module is connected to an iLOQ N500 Net Bridge via RS485 bus wiring.
For installation instructions and information, see
- N501: https://www.iloq.com/en/catalogue/n501/
- N501.1: https://www.iloq.com/en/catalogue/n501-1/
- N502: https://www.iloq.com/en/catalogue/n502/
NFC readers (N504i and N505i)
iLOQ NFC readers can be installed directly to the door leaf or near the door, at a maximum distance of 10 m from an online module. iLOQ NFC readers are connected to the reader bus of the N501 online module, N501.1 online module or iLOQ N502 online module.
iLOQ NFC Readers (N504i and N505i) are identified and managed automatically based on device wiring. They cannot be edited or programmed in iLOQ Manager+. You can only view their properties from Locking devices > Online devices.
For installation instructions and information, see
