iLOQ 5 Series Deployment Guide
Before you start deploying a locking system for residential buildings, ensure that you have:
- The iLOQ Manager license.
The iLOQ Manager software installed on the Windows operating system. For more information, see Installing iLOQ Manager.
Figure: iLOQ Manager 
At least two Programming Tokens. We recommend that you add three Programming Tokens to the locking system.
Figure: Programming Token 
The deployment wizard phases are self-explanatory and straight-forward. When one phase is completed, you can move on to the next phase. The process is continued in this manner until it is complete, and the deployment has been successfully completed and the locking system is moved to the administration mode.
Start from the Dashboard by selecting Locking system deployment.
- Adding a Floor Plan
This section describes how to add a floor plan in the system deployment phase. - Adding Locking System Information
This section describes how to upload a floor plan and add general information on the locking system, used when generating the common access rights and apartment locks. - Adding Access Rights
This section describes how to add access rights in the system deployment phase. - Adding Time Profiles
This section describes how to add time profiles in the system deployment phase. - Adding Common Area Locks onto the Floorplan
This section describes how to add common area locks directly onto the floorplan. - Adding Apartment Locks
This section describes how to add apartment locks to the system. - Adding Apartment Keys
This section describes how to add apartment keys to the system. - Creating Keys Based on Access Rights
This section describes how to add keys from access rights, to the system. - Viewing the Lock Chart
This section describes how to view the lock chart. - Viewing the Draft
This section describes how to view a draft of the added locks and keys. - Adding Tokens
This section describes how to add tokens in the system deployment phase. - Adding Administrators
This section describes how to add administrative users and attach them to the tokens created in the Adding tokens stage. - Programming Locks
This section describes how to program locks. - Programming Keys
This section describes how to program keys. - Viewing the Summary
This section describes how to view a summary of the deployed locking system.