Select your region or visit global site

Support
Open navigation

Adding Locking System Service Addresses

This section describes how to add new locking system service addresses to iLOQ Manager.

Proceed as follows.

  1. Open iLOQ Manager.

    The login screen is opened.

    Figure: Login Screen
    Login Screen
  2. Click the Edit button.

    The login data screen is opened.

    Figure: Login Data Screen
    Login Data Screen
  3. Enter locking system information as follows:
    • Service address — Enter the locking system database server address, in this field. Ensure that the service address is the same as in the Login data document provided with the locking system.
    • Service code — Enter the locking system-specific service code, in this field. Ensure that the service code is the same as in the Login data document provided with the locking system.
    • Customer name — Enter the name of the locking system, in this field.
  4. Test the connection by clicking the Test server connection button.
  5. If the server connection succeeds, select OK.
  6. If the server connection fails, edit the proxy settings as follows:
    1. Uncheck the Use default connection settings (default) check box.

      Proxy settings are opened:

      Figure: Proxy Settings
      Proxy Settings
    2. Select Use same proxy settings as Internet Explorer.
    3. Test the connection by clicking the Test server connection button.
  7. If the server connection succeeds, select OK.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article

Didn't find what you were looking for?

Submit a ticket