Select your region or visit global site

Support
Open navigation

Manually Installing the Drivers

This section describes how to manually install the drivers, if they are not automatically installed through Windows Update.

Proceed as follows.

  1. Connect the Programmer to the computer USB port.
  2. Open your browser and select www.iloq.com > Products > Software > iLOQ Programmer > Driver.
  3. Save the .zip package on your computer.
  4. Extract the .zip package on your computer.
  5. Open the Windows Device manager.
  6. Select Other devices > FT232R USB UART
  7. Right-click to select Update driver software.
  8. Select Search the driver from the computer.
  9. Click Browse and the select the driver that you downloaded and extracted.
  10. Click OK.
  11. Click Next.
  12. Return to Windows Device manager and select USB Serial Converter.
  13. Right-click to select Update driver software.
  14. Select Search the driver from the computer.
  15. Click Browse and the select the driver that you downloaded and extracted.
  16. Click OK.
  17. Click Next.
  18. Return to Windows Device managerUSB Serial Port is listed in the Ports menu.
  19. You can now remove the downloaded .zip package and the folder where you extracted the drivers.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article

Didn't find what you were looking for?

Submit a ticket