Home iLOQ S10 User Manual iLOQ S10 Administration Guide Managing Key PIN-codes This section describes how to manage key PIN-codes on iLOQ Manager.Managing key PIN-codes consists of two main tasks:Editing and viewing key PIN-codes, which are described below.Handing over of key PIN-codes to key holders. You can include the key PIN-code to the key hand over report by adding the Key PIN-code field to the report.For more information, see Editing the Locking System Report Texts.Proceed as follows.Select Basic data > Browse keys.Select the desired key.Right-click to select Edit PIN-code.The Editing of key PIN-code wizard is opened.Select Edit PIN-code.The key selection window is opened.Select Next.The Editing of key PIN-code window is opened.Select the Requirement of key PIN-code with the radio buttons. The options are:No access when PIN-code is required — The key does not have access during the lock PIN-code times.Access without PIN-code — The key has access without the PIN-code during the lock PIN-code times.Access with PIN-code — The key has access with the PIN-code during the lock PIN-code times. If you select this option, select also the Generating of PIN-code setting. The options are:Keep current PIN-code for the key — All keys have an automatically generated PIN-code. Select this option if you do not want to change the PIN-code.Generate new PIN-code for the key — Select this option if you want to change the PIN-code and let iLOQ Manager generate a new PIN-code.Type new PIN-code for the key — Select this option if you want to manually change the PIN-code or view the current PIN-code. If you select this option, two new fields are shown:Current code — This field contains the current PIN-code.New code — Type in the new PIN-code for the key.Select Next.A summary screen is shown.Select Ready.Select Close.