Select your region or visit global site

Support
Open navigation

Network Module LED Indicators

Table 1. Network Module LED Indicators
LEDDescription
ST1

Status 1

  • Green light is on: the device settings are in order and the connection to the server has been successfully tested.
  • Orange light is on: the network module is attempting to connect or an active connection to the server has been established. Data is being updated to the network module, or the network module is polling the server for programming tasks.
  • Red light is on: the network module cannot connect to the server, or the settings are missing.
ST2

Status 2

  • Keeps blinking if a master token is not connected to the network module.
  • Green light is on: a master token is connected.
L0, L1, L2, L3, L4, L5

The lock LEDs (1-6)

  • Green light is on: a lock is connected to the network module.
  • Color sequence while reading the log of a lock: red → orange → blinking green.
  • Color sequence during the programming of a lock: red → orange → green.
K1, K2, K3, K4

Control relay LEDs

  • Green light is on: the controlling of the relay is active.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article

Didn't find what you were looking for?

Submit a ticket