Home iLOQ S10 User Manual iLOQ S10 Administration Guide Viewing Calendar Controlled Door Properties This section describes how to view the properties of a calendar controlled door on iLOQ Manager.Proceed as follows.Select Additional data > Calendar controlled doors.Double-click the selected door.The tabs are:Basic information — The fields are:Network module name — This field indicates the network module name to which the Door Module is connected.Door name — The name of the calendar controlled door.Relay number — The number of the output relay, which this calendar controlled door controls.Door module serial number — The serial number of the Door Module.The following information refers to lock information, if the door module is programmed as a lock, and it controls the same relay as the calendar.Placement — This column contains the placement information of the lock.Locking target — This column contains the locking target information of the lock.Door module serial number — The serial number of the lock, that is, the Door Module.Relay type — This value is always Relay.Calendars — This tab contains the calendars attached to control the door. The columns are:Calendar name — The names of the calendars attached to control the door.Type — This tab contains the calendar type. See Calendar Controlled Doors.Lock — This tab contains lock information, if the door module is programmed as a lock.Door audit trail — This tab contains the event log on the calendar controlled door relay. The columns are:Index — The consecutive event number. The possible lock event index numbers refer to the lock audit trail event numbers.Point of time — The time when the event took place.Event type — The type of event.Duration — Duration of the calendar control.Source — The controlling source, such as a calendar name or lock placement.